Side Wall Specifications Spray System (Open Blow)

The contents of one bag install in open wall areas by pneumatic equipment with or without adhesive will provide insulation resistance (R) value at the weights and coverages shown below:

R-Value	Inches	Coverage per bag (sq. ft.)	Weight per sq. ft.	Bags per 1000 sq. ft.
15	3.5	25.68	1.17	38.99
15.5	3.63	24.79	1.21	40.33
23.5	5.5	16.38	1.83	61.04
34	8	11.27	2.68	88.73

"R" is a measure of insulating ability. "R" means resistance to heat flow. The higher the "R" Value, the greater the insulation value. Tested in accordance with ASTM C 518.

Attic Specifications

R-VALUE*	Min Thickness	Max. Net Coverage	Weight per Sq. Ft.	Bags per 1000 Sq. Ft.
38	11.21	18.09	1.66	55.27
33	9.74	20.83	1.44	48
30	9.6	23.44	1.28	42.67
26	8.32	27.04	1.11	36.98
22	7.04	31.96	0.94	31.29
19	6.08	37.01	0.81	27.02
13	4.48	50.22	0.6	19.91
11	3.52	63.92	0.47	15.64

R Value is a measure of insulating ability. R means resistance to heat flow The higher the R value, the greater the insulation value. Vaules were taken at a mean temperature of 75F. Tested in accordance with ASTM C 518.

Test	Test Standard	Test Results
ASTM E 84	Surface Burning Characteristics
	Flame Spread	5
	Smoke Development	0
ASTM E 136	Non-Combustible	Passed

ASTM E 119-83 w/ Hose Stream	1 Hr. Wall Assembly	Passed
ASTM E 119-88 w/ Hose Stream	2 Hr. Wall Assembly	Passed

ASTM E 413	Sound Isolation Rating	Up to 69
ASTM C 553	Moisture Absorption	Passed

NFPA Mod. 275	15 Minute Thermal Barrier	Passed*
ASTM C 764	Corrosion	Passed

ASTM E 1332	Outdoor-Indoor Transmission	OITC up to 48
ASTM E 1338	Fungus Resistance	Passed

SBCCI Report #9551	Fire Resistive Construction
UL Classified per Follow-up procedure		R14191

*Rock-Tight™ Adhesive was used to achieve these results.